window film squeegees.

squeegees for the professional installer.


Everything you need to complete your window film installations, our window film tools are specially selected to ensure quality installations. We offer a variety of tools, so choose from the categories below to see more. You can also download a printable PDF catalogue.


Unger Pro Handle (AT-050)

This rubber-coated squeegee handle works with many different squeegee blade attachments: Clear Max, Blue Max, and of course the regular squeegee blade with the soft rubber insert (for glass prep) in the stainless steel channels. Essential tool for glass cleaning and for using the special higher durometer finishing squeegee blades.

18" Squeegee & Channel (top) (AT-056)

12" Squeegee & Channel (second from top) (AT-055)

8" Squeegee & Channel (second from bottom) (AT-054)

6" Squeegee & Channel (at bottom) (AT-053)

Stainless steel channel and soft rubber squeegee blade insert for use with the Unger Pro Handle (AT-050). The 8-18" lengths ARE ideal for most residential/ commercial window films installations. Used in the glass cleaning process and in the final cleanup after the actual film installation to remove soap streaks or smudges. The 6" length channel can be used for automotive use.

18" Squeegee Blade (AT-0018)

12" Squeegee Blade (AT-0012)

8" Squeegee Blade (AT-0008)

6" Squeegee Blade (AT-0006)

Differing lengths of rubber blade for Pro Unger squeegee channel (AT-050), used for window cleaning, not installation.

6" Pro Squeegee Deluxe (AT-062)

A "finishing" (installation) squeegee as a ready-to-use assembly. Used to remove application solution from beneath the film during the installation of all film types. Recommended for safety/security films, 4 mil and thicker.

8" Pro Squeegee Deluxe (AT-064)

A "finishing" (installation) squeegee as a ready-to-use assembly. Used to remove application solution from beneath the film during the installation of all film types.

6" Pro Squeegee Blade (AT-063)

8" Pro Squeegee Blade (AT-061)

Replacement blade to the 6" AND 8"Pro Squeegee (AT-062) used as a means of removing application solutions from beneath the film during the installation of all film types.

6" Flatfoot Squeegee Blade (AT-069)

8" Flatfoot Squeegee Blade (AT-059)

Flatfoots are specially angled blades for the Pro Squeegee. The angle is designed to maximize the surface area in contact with the film, thereby removing much more mounting solution than a standard Pro blade with a square edge. These are special order items, please call for availability.

GT042 - 8" Silver Security Squeegee (AT-042)

Comfortable, ergonomic handle is designed especially for security film installation. Advance curved handle applies more pressure to surface, reducing fatigue and ensuring easier, better installations. Blade is replaceable with either the Flatfoot (AT-059) or Pro Squeegee (AT-061) blade.

Motus D-Grip Handle (AT-030)

Increase the leverage of a standard handled squeegee by adding a D-Grip Motus handle. Excellent for heavy, security film applications.

>

28" Tube Squeegee (AT-121)

Squeegee tool used for glass cleaning. Not recommended for installation of films. Sometimes called the "Smoothie."

28" Smoothie Blade (AT-146)

Replacement blade squeegee tool used for glass cleaningEconomy size usually cut to shorter 4-5" lengths before use. Not recommended for installation of films.

18.5" Yellow Blade (AT-147)

Economy size squeegee usually cut to shorter 4-5" lengths before use. Used for removal of application solution during the installation process. (Handle sold separately.)

 

Red Devil Squeegee (AT-033)

Angled, high durometer squeegee. Excellent for corners.

Slim Foot Squeegee (AT-040)

Modeled after the Big Foot Squeegee, the slim foot has a slender design that can reach into tighter openings. The no rib squeegee helps reach behind break lights and has a vinyl grip for secure handling.

Blue Max 5" Hand Squeegee (AT-117)

Excellent as finishing a squeegee in automotive and flat-glass applications, especially for sputtered films. Harder than AT-203, this tool is superior for water evacuation on films requiring maximum water removal, though not as effective on severely compound curved glass because of its greater rigidity. For automotive applications, many installers therefore prefer the Clear Max squeegee, especially on curved glass. Installers generally cut off left & right sides at an angle to allow leading edge to better squeegee into corners (see AT-122, AT-204).

Super Clear Max Squeegee (AT-203)

Excellent as finishing squeegee tool; high durometer, yet flexible. For mounting inside in the Unger Pro handle. More flexible than the AT-117 Blue Max auto squeegee. Has beveled leading edge for excellent flush mounting. Installers generally cut off left & right sides at an angle to allow leading edge to better squeegee into corners. (Handle sold separately).

6" Block Squeegee (AT-148)

12" Block Squeegee (AT-149)

Combination squeegee/hard card used as a finishing tool during film installation. Hard edge, when wrapped in a layer of cotton fabric or lint-free paper towel, can be used for wicking water out along borders (after an installation). Can be cut to various angle shapes to reach tight, sharp cornered glass areas. Hard-edge sharpness can be maintained by using AT-068 Hard Card Sharpener.

Teflon Edge Squeegee (AT-086)

While not actually made of Teflon, this tool is often called the Teflon "hard-card" or "edge tool." It is an essential tool for every installer in every installation situation. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation). Moreover, it can be used for c) direct squeegeeing of film along borders without any wrapping, and d) edge trimming by using it as a blade-guide, creating a uniform tiny gap between the film edge and the perimeter gasket or frame. Finally, e) it's used to retract gaskets to slip underneath. It is extremely hard, yet (if clean) will not scratch SR-coated film. Edge sharpness can be maintained by using AT-068 Hard Card Sharpener. Installers often cut down the tool beginning at the middle top in a straight line to the lower right corner. This angularity allows the tool to penetrate into corners for cleaning and squeegeeing purposes.

4" Universal Squeegee (AT-099)

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (after an installation) or used for sweeping film flush to the glass during heat forming procedures. Edge sharpness can be maintained by using AT-068 Hard Card Sharpener.

 

 

 

Diamond Tip (AT-113)

The new Diamond Tip Squeegee has several advantages. As well as the rounded tip, it has a pointed tip for better ability to reach into small window corners. Also, the raised edges in the body of the squeegee make it easier to grip and less likely to slip out of your hand when it's wet.

The Shuttle (AT-092)

About 10" (25 cm) long. A hard card able to reach into tight areas located at the bottom edge of rear window glass. Edge sharpness can be maintained by using AT-068 Hard Card Sharpener. Name derives for the profile similar to the Space Shuttle.

The Slammer (AT-091)

Used as a hard card-finishing tool for a variety of installation challenges. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation), and c) directsqueegeeing of film along borders without any wrapping. Moreover, it can be used for d) easily reaching the lower portion of rear window glass, e) temporarily pulling back rub rails or, f) to reach into sharp angled corners. It is extremely hard, yet (if clean) will not scratch film. This new and improved design has a stronger handle, allowing you to apply more pressure onto the surface. Edge sharpness can be maintained by using AT-068 Hard Card Sharpener.

The Conqueror Squeegee (AT-202)

Combination squeegee/hard card used as a finishing tool during film installation. Able to reach into sharp angled corners. Hard edge sharpness can be maintained by using AT-068 Hard Card Sharpener. Can use the hard plastic corner (upper right of photo) for direct film squeegeeing (with SR films) in tight corners and, wrapped in a diaper or paper towel, cleaning in these tight, difficult to reach areas.

Lil' Chizler - Blank (AT-083)

A much harder tool than the Teflon edge tool, this plastic device is used for the occasional "press-down" of small film creases, or scraping away old film remnants on scratch-sensitive surfaces. Its sharpness allows one to get under border gaskets, and press down stubborn "fingers." Caution must be exercised because of the possibility of scratching film.

Clear Super Squeegee - Large (AT-066)

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (during glass cleaning or after an installation). Edge sharpness can be maintained by using the Hard Card Sharpener (AT-068). Hard but flexible & about 6 inches wide, has great "scooping" action for direct "contour" squeegeeing of film in lower corners of rear windows.

Clear Super Squeegee - Small (AT-067)

Combination squeegee/hard card used as a finishing tool during film installation. When wrapped in a layer of cotton fabric or lint-free paper towel it can be used for wicking water out along borders (during glass cleaning or after an installation). Edge sharpness can be maintained by using the Hard Card Sharpener (AT-068).

Hard Card Sharpener (AT-068)

This sharpening tool is essential for maintaining the sharpest, smoothest possible edge on any thin, "hard edge" tool. Saves money by extending the life of these tools by more than a hundred-fold. Has replaceable blade: just use a few segments a stainless steel Ofla blade, remove and replace with screw driver underneath. An amazing tool which works like a wood plane.

Little Foot Squeegee (AT-044)

This squeegee measures about 6" along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The little foot has plenty of room to keep a good grip on the squeegee.

Side Swiper Squeegee (AT-207)

Side Swiper Replacement Blade (AT-118-6)

Reaching the sides and bottom edges of rear windows and behind speakers has never been easier with this handled squeegee. Although this squeegee was designed for automotive use, it has been discovered that it helps to get to the hard to reach areas on residential applications as well.

6" White Teflon Squeegee (AT-086-6WHT)

A 6" version of your old favorite. This white firm Teflon hard card is just like the original but with extended width for greater coverage. It is extra slender for a deep reach.

6" Black Teflon Squeegee (AT-086-6B)

 A 6" version of your old favorite. This black semi-firm Teflon hard card is just like the original but with extended width for greater coverage. It is extra slender for a deep reach.

Contour Squeegee (Soft) (AT-201GRN)

This tool automatically spreads out finger tension which makes it the premier applicator for non-flat surfaces. Perfect for automotive and paint protection installations.

Contour Squeegee (Firm) (AT-201YLW)

 This tool automatically spreads out finger tension which makes it the premier applicator for non-flat surfaces. Perfect for automotive and paint protection installations.

EZ Reach Squeegee (AT-200)

 The  first of it's kind corner reach tool! Made extra slender profile for deep reach ease.

The Bulldozer I (Auto) (AT-205)

This design allows you to get those hard to reach areas, such as behind speakers, brake lights, low angles and rear windows. This tool has a 6" squeegee blade and is 15" in overall length.

The Bulldozer II (Flat) (AT-206)

 Like its brother, this squeegee allows you to reach those tough areas and has reinforced ribs on the back side for extra rigidity and leverage. This tool has a 6" squeegee blade and is 15" in overall length. A great finishing tool.

The Scrubber (AT-209)

A must have tool for automotive. This tool allows you to reach behind speakers and brake lights. Scrub away adhesive along the bottom edges of sloped rear windows. Uses replaceable standard white scrub pads cut 2"x3". This tool is 3"x15" long